Newsletter

Parker 65 Mk1 Maximize

Parker 65 Mark 1 Connectors

Parker 65 Mk1 brass connector

More details

  • With Piercing Tube
  • Without Piercing Tube

58 Items in stock

£8.00

On sale On sale!

Average grade 
ProductFrom (qty)Discount
Parker 65 Mark 1 Connectors5 -£0.50
Parker 65 Mark 1 Connectors10 -£1.00

These quality Parker 65 Mk 1 connectors are produced in brass

When ordering this part you can select either including a new piercing tube at a reduced price, or re-use the piercing tube from the old connector.

New tubes are available from this site which ensure a good repair .  It fits into the front end of the connector which is recessed to accept the tube flange. I recommend a light coating of  grease on the flange which ensures an ink tight seal when fitting

This connector will accept the larger 7.5mm converter

Length 21mm

Large thread diameter 9.6mm [open end] which has a 3 start 48TPI thread    

Small thread 9.1mm diameter which has 48TPI Single start thread  thread

Please see discounted costs on larger orders.

 

  • With Piercing Tube With Piercing Tube
  • Without Piercing Tube Without Piercing Tube
Grade 
Tony D
04/10/2018

Parker 65 Mk 1 Connector


I did not have any shellac, but i did have some light grease so i put a tiny bit on the underside of the flange of the piercing tube before i fitted it making sure non got inside the hole. It probably was not needed as the tube was a good fit anyway. When fully assembled there were no leaks! Great product it saved my pen

    Write your review

    Parker 65 Mark 1 Connectors

    Parker 65 Mark 1 Connectors

    Parker 65 Mk1 brass connector

    Write your review

    Cart  

    No products

    £0.00 Shipping
    £0.00 Total

    Cart Check out