Parker 65 Mark 1 Connectors

These quality Parker 65 Mk 1 connectors are produced in brass

When ordering this part you can select either including a new piercing tube at a reduced price, or re-use the piercing tube from the old connector.

New tubes are available from this site which ensure a good repair .  It fits into the front end of the connector which is recessed to accept the tube flange. I recommend a light coating of  grease on the flange which ensures an ink tight seal when fitting

This connector will accept the larger 7.5mm converter

Length 21mm 

Large thread diameter 9.6mm [open end] which has a 3 start 48TPI thread    

Small thread 9.1mm diameter which has 48TPI Single start thread  thread

Please see discounted costs on larger orders.